When I first got started in construction, I was a few months out of the military, and I knew the importance of getting the right footwear for the job. But I didn’t know from the beginning just what that would entail. Steel toe boots were a must for obvious reasons of safety, but what else did I need to look for in a work boot?

Here is a list of the Best Steel Toe Boots

Well, it really only took a day or two at work without the right boots for me to have a pretty good idea. My job involved standing and walking around on hard, unforgiving concrete with very few breaks. Halfway through the day, my feet would start to ache like crazy. By the end of the day, I could hardly stand being on them, which made it pretty hard to focus on doing my job.

So I set out to find the best steel toe boots for my situation, and in doing so, I ended up compiling a lot of research for steel toe boots for concrete, oil fields, and other situations and conditions. After all that work, it only seemed logical to put together a comprehensive guide for anyone who could benefit from it. So below, I will share what I learned with you along with reviews for the best steel toe boots.

What Makes a Steel Toe Boot Great?

Not all steel toe boots are equally well designed, and even among those that are, not all of them are equal to the particular job that you need them for.

So what should you look for in a great steel toe boot?

• Comfort. Many people who are shopping for steel toe boots assume they are supposed to be uncomfortable. This is not true at all. The right boot with the right fit should be just as comfortable as your normal everyday footwear.
• ​A good fit. The most common mistake that people make when shopping for steel toe boots is usually to purchase boots that are too short. This is a common mistake with footwear altogether, but it is incredibly obvious when you have a hard steel toe. If you get the right fit, your toes should not be smashed up against the steel. In fact, you should only feel the steel cap if you move your toes around. Keep in mind that purchasing a wider shoe will not remedy this on its own; the shoe must be longer to give your toes the space they need.
• Boots which are designed for the specific job and environment you need them for. There are a lot of great all-purpose steel toe boots, but there are also options which are ideal for different environments, like oil fields or concrete. These boots have additional features which provide you with the support and safety you need to work comfortably and safely through a long day.

As one last recommendation, plan to wear special socks with your steel toe boots. There are socks designed especially for this purpose; they have extra cushioning around the toe and the sides as well as the heel. Purchase the socks first and try them on so that you can get a feel for how they will impact sizing when you are shopping for your steel toe boots.

Also, when you are measuring your foot to pick the right size, remember to do so at the end of a work day. Your feet swell over the course of the day, and you want to use your maximum foot size when you are selecting a boot. Otherwise you risk buying a boot which is too small and pinches your toes.

Steel Toe vs. Composite Toe Boots

It is useful to note that there are actually two kinds of safety toe boots: steel toe and composite toe boots.

A steel toe boot has a cap which is of course made of steel. With a composite toe, non-metallic materials are used, usually a combination of fiberglass, carbon fiber, plastic, and Kevlar. Both types of boots do a great job protecting your feet from impact or compression.

So how do you know which you need?

Consider a steel toe if:

• You are in a particularly hazardous environment and need a boot which can stand up to anything without shattering. Steel is stronger than a composite toe.
• ​You are looking to save money on a solid work boot. Steel costs less on average than a composite toe.
• You are looking for a boot which is tried and true. Steel toe boots have been around a lot longer than composite toe boots, and you can be assured they will get the job done.

Consider a composite toe if:

• You have to pass through metal detectors a lot on the job.
• ​You are working in an especially harsh climate, and do not want to wear metal which will conduct heat or cold.
• ​You work around live wires and want more protection from electricity.
• You do a ton of walking and want the most lightweight boots.

Is It True that Steel Toe Boots Can Cut Off Your Toes?

There is a common urban legend that steel toe boots are more dangerous than regular boots. The assumption is that a heavy enough weight would cause the steel toe to cave in, literally chopping off your toes.

Thankfully we can put this myth to rest. In fact, the MythBusters tested this out, and found that it was false.

Your feet definitely are safer with steel toe boots than without, and they will not chop off your toes.

Which Companies Make the Best Steel Toe Boots?

Here are some of the top manufacturers of popular steel toe boots:

• Red Wing Shoes: Ask your co-workers what brand of steel toe boots they purchased, and there is a good chance that about half of them will answer, “Red Wing Shoes.” This is arguably the biggest name in work boots, with a history dating back to 1905. Today, Red Wing Shoes is still headquartered in Red Wing, Minnesota. Check out their Irish Setter brand of work boots for some excellent safety toe options.
• ​Wolverine: Another popular brand of work boots is Wolverine. Wolverine’s history goes back more than 130 years. Wolverine’s boots are renowned for their durability and their comfort. Key features of Wolverine boots include patented DuraShock shock absorption technology, compression pads, and fully cushioned removable foot beds.
• ​Timberland: This New England based company was founded in 1928, and has been manufacturing dependable work boots ever since. They are particularly well-known for their waterproof work boots, originally developed in 1965. Since then, Timberland has continued to build on its tradition of innovation, perfecting its safety toe waterproof boots.
• Rockport: Rockport is another boot and shoe manufacturer from New England, with a history dating back to 1930. Rockport is famous for producing popular walking shoes which offer performance, comfort, and rugged durability. Transferring those qualities to work boot production, Rockport designs durable steel toe boots that stand the test of time.

Best Steel Toe Boots Which are AR670-1 Compliant

Shopping for steel toe boots which you can wear on the job in the army? There are not a whole lot of steel toe boots which are AR670-1, but I have gone ahead and compiled a short list of candidates to consider.

 1.  Rocky Men’s 8 Inch S2V Protective Steel Toed Work Shoe

Rating: 4.0 / 5.0

​

This steel toe work boot is AR670-1 compliant, and can be purchased in the $200-$300 range. It does not have a huge number of reviews, but the consensus rating is 4 out of 5 stars.

Key Features

• Made of suede and leather with a vibram sole. The sole is high-walled and stitched to the upper to improve stability.
• ​Features roll-stop ankle stability.
• ​S2V sieve technology promotes air circulation, keeping your feet cool and dry as you work.
• ​Leather upper is flame- and water-resistant.
• Drainage ports let water out of the boot.
  

What the Rocky Men’s 8 Inch S2V Protective Steel Toed Work Boot Is Best For

As an AR670-1 compliant work boot, this boot is an excellent choice if you are in the service. In fact, it is one of very few steel toe service boots on the market. So if you need something which is uniform compliant, you should strongly consider these boots.

Pros and Cons

These boots are a bit heavier than a lot of AR670-1 compliant boots, which is the only common complaint among customers, but these seem to be buyers who do not realize that a steel toe boot is always going to be on the heavy side. Once you break them in, they reportedly hold up great to daily wear.

Sizing Tips: Buyers say that the Rocky Men’s S2V Steel Toed Work Boot fits more or less true to size.

 2.  Belleville C300 ST Hot Weather Steel Toe Boot

Rating: N/A

​

Another steel toe boot which is AR670-1 compliant is the Belleville C300 ST Men’s Hot Weather Steel Toe Coyote Boot. This boot sells in the $100-$200 range. You will be hard-pressed to find reviews for it, so it does not appear to be a popular purchase. But as it is one of the few AR670-1 compliant steel toe boots I could locate, I decided to research and feature it.

Key Features

• Leather construction with cattlehide and nylon upper.
• ​Midsole includes extra cushioning and shock absorption.
• ​Vibram outsole.
• Insole is a single density molded removable insert.

What the Belleville C300 ST Hot Weather Steel Toe Boot Is Best For

This steel toe boot was designed specifically for hot locations. As it is AR670-1 compliant, it is ideal for service use, but you could consider it for any hot environment.

Pros and Cons

The biggest drawback with this boot is the simple lack of feedback online; as there are few customer reviews, your knowledge about this boot is limited until you purchase it. On the plus side, Belleville is one of the top brands in military footwear. As a dependable manufacturer, they doubtless have made a great boot here.

Sizing Tips: No data available.

 3.  Belleville 775 600g Insulated Waterproof Steel Toe Boot

Rating: 4.3 / 5.0

​

While the Belleville C300 ST Hot Weather Steel Toe Boot is ideal for hot climates, the Belleville 775 600g Insulated Steel Toe Boot is an AR670-1 compliant option for cooler climates. This boot sells in the $150-$250 range, and has an average rating of 4 out of 5 stars.

Key Features

• Full grain cowhide leather upper provides extra durability.
• ​Cushioned Direct Injected Midsole and Vibram 360 Degree Fire And Ice Sierra Outsole provide excellent traction even on ice.
• 600g Thinsulate insulation keeps your feet warm while Goretex waterproof fabric keeps them dry.

What the Belleville 775 600g Insulated Waterproof Steel Toe Boot Is Best For

These boots are a good option for duty in a cold climate, but they are also a great choice for civilian use in similar environments. Thanks to the superior traction, they are excellent not just for ice, but for other slick surfaces as well.

Pros and Cons

Customers praise the insulation on these boots, reporting that they are comfortable and warm to wear even in snow. The traction also gets high marks; one customer who is a mechanic mentioned specifically that they hold up great through oil, antifreeze, grease, and dirt. A number of customers mentioned that the boots feel surprisingly lightweight. Several buyers did mention however that these boots fall apart more quickly than most, so that is a potential drawback.

Sizing Tips: A few customers stated that these boots run about half a size large. If you are going to be wearing thick socks however, this may be just what you need.

Best Steel Toe Boots for Oil Fields

The following steel toe boots are designed specifically for the slick environments of oil fields, and will resistant damage from oil and chemicals.

 1.  Walls Oilfield Camo Men’s Wyatt Steel Toe Boot

Rating: 4.3 / 5.0

​

If you are shopping for a pull-on steel toe boot which you can wear comfortably in an oil field, the Walls Oilfield Camo Steel Toe Boot is one option to consider. This boot only has a couple of reviews, but it is reasonably priced and designed specifically for oil field use. You can buy them for $40-$140.

Key Features

• Convenient pull-on design is easy to get on and off.
• ​Leather upper features sturdy leather pull handles.
• ​Injected polyurethane midsole provides flexibility and durability.
• ​The polyurethane comfort insole is removable.
• 11” shaft, 13.5” circumference opening.
• ​Steel toe ASTM F2413 11 is rated for EH protection.
• Outsole is resistant to chemicals and oil.

What the Walls Oilfield Camo Men’s Wyatt Steel Toe Boot Is Best For

These boots are designed to be worn while working at an oil field, and can provide your feet with protection from oil and chemicals along with the traction and comfort you need to get through your day.

Pros and Cons

There are not a lot of reviews for these boots. They average out to 3.5 stars as of right now, but arguably should be higher. Why? The reviewers who commented on these boots say they are comfortable, have excellent grip, and overall are exactly what you need. But there is one complaint, and that is a lack of insole support. So if you buy these boots, you should be prepared to purchase separate insoles. If you are okay with that, these may be a great purchase.

Sizing Tips: No data available.

 2.  Irish Setter Men’s 83608 6" Steel Toe Work Boot

Rating: 4.3 / 5.0

​

These Irish Setter Men’s Work Boots from Red Wing Shoes are an excellent choice for oil fields, concrete, and many other tough environments. They are widely recommended and are very popular, with 4.5 out of 5 stars and more than 190 reviews as of the time of this writing. You can buy them for $80-$150.

Key Features

• Full-grain Crazy Horse leather with contrast triple stitching and a synthetic G-Grip sole.
• ​6” shaft and 14” opening.
• Includes a removable polyurethane footbed.

What the Irish Setter Men’s 83608 6" Steel Toe Work Boot Is Best For

This is actually one of those all-around great choices for oil field or concrete wear. If you don’t know what work boot to purchase, it is hard to go wrong with the Irish Setter 83608.

Pros and Cons

Buyers say that these boots provide excellent support, but still enough flexibility to provide you with a comfortable fit for walking or standing. The only consistent complaint is that they sometimes give out after a couple years of light use.

Sizing Tips: A few customers have mentioned that these boots run about a size large, so you need one half or a full size smaller than you usually would wear.

 3.  Timberland PRO Direct Attach 6” Steel Toe Waterproof Boot

Rating: 4.3 / 5.0

​

These extremely popular boots have more than 1,130 customer reviews as of the time of this writing and an average of 4/5 stars. You can purchase them in the $50-$200 range.

Key Features

• Leather with a synthetic sole.
• ​Shaft measures 6”, heel measures 1.75”.
• ​Insulated upper has a lace-up vamp and padded collar. Upper is seam-sealed and waterproof.
• ​400g insulation for warmth.
• Outsole is oil-resistant and non-marking for optimal traction.
• ​Antimicrobial treatment helps repel unpleasant odors.
• Nylon shock diffusion plate provides extra support.

What the Timberland PRO Direct Attach 6” Steel Toe Waterproof Boot Is Best For

Because these boots are well-insulated, they are excellent for working in oil fields in colder climates. Buyers say that the insulation is substantial enough even to keep your feet comfortable in the snow.

Pros and Cons

The majority of buyers have left outstanding reviews for these boots, reporting that they are extremely comfortable and that they hold up well to wear and tear, even in harsh and snowy conditions. One buyer mentioned that even after five hours outside working in 16 degrees Fahrenheit in the wind, his feet never once got cold. A few buyers have however mentioned that the sole broke or came unglued after less than a year.

Sizing Tips: According to several buyers, these boots run half a size small. So you may want to go half a size up, especially if you are going to wear thick socks.

Best Steel Toe Boots on Concrete

 1.  Wolverine Men's Steel Toe Raider Boot

Rating: 4.3 / 5.0

​

One of the most highly rated steel toe boots for concrete is the Wolverine Men’s Steel Toe Raider Boot, which has an average of 4.5 stars and more than 280 customer reviews. You can buy it for $100-$250.

Key Features

• Available in black or brown.
• ​Leather with a rubber sole.
• ​Outsole molded with multishock shock absorbing compression pads. Resistant to oil, water, chemicals, heat, slips and abrasion.
• ​Includes a removable full cushion footbed.
• Nylon shank improves stability.

What the Wolverine Men's Steel Toe Raider Boot Is Best For

This is a great all-around work boot. I recommend it especially for wear on concrete because of the emphasis on shock absorption. But it might also be a good choice for oil fields with its resistance to chemicals, oil, and slips.

Pros and Cons

The reviews for this boot are particularly impressive. Not only is it lighter in weight than a lot of other steel toe boots, it also lacks the problems with the sole which are common among work boots. These soles are well designed and unlikely to split or wear out within a matter of months. Despite this, there is enough flexibility for comfortable walking or climbing. The stitching is also very sturdy. Some buyers mentioned the eyelets and laces as a weak point of the design.

Sizing Tips: These boots run a bit small.

 2.  Wolverine Men's W08289 Wolverine Steel Toed Boot

Rating: 4.3 / 5.0

​

These work boots are an affordable option in the $50-$150 range, and currently have an average rating of 4 out of 5 stars, with more than 300 customer reviews.

Key Features

• 7” full-grain leather shaft, handmade with a synthetic sole.
• ​Resistant to slips.
• ​Unlined (ideal for hot climates).
• ​Steel or composite toe available.
• ​Full-cushion removable footbed included.
• ​Nylon shank absorbs shock for added stability.
• Sole is resistant to water, oil, and abrasion.

What the Wolverine Men's W08289 Steel Toed Boot Is Best For

Consider these work boots for concrete or oil field settings. Because there is no insulation, you should not wear them in a cold climate. They can however help to keep your feet cool in a hot environment. The lack of insulation also helps to keep the weight down (which as it turns out is a good thing).

Pros and Cons

As just mentioned, these boots really do not need any added weight; they are already quite heavy, so you should avoid them if you are looking for something lightweight and non-fatiguing. These would be better for standing in place than they would be for moving around a lot or climbing. Buyers do say that they are however very comfortable and hold up well to a lot of use. One customer also specifically mentioned that he bought these for concrete and that they were the first boots he tried which provided adequate comfort and support.

Sizing Tips: These steel toe work boots run both large and wide.

 3.  Timberland PRO Men’s 52562 Endurance 6” Work Boot

Rating: 4.3 / 5.0

​

This steel toe work boot is rated with an average of 4 out of 5 stars and has more than 440 customer reviews. You can purchase it for $120-$200.

Key Features

• Leather with a rubber sole. Shaft measures 5.5” and heel measures 1.75”.
• ​Rubber double toe is resistant to abrasion.
• ​Outsole is resistant to slips, oil, abrasion and electrical hazards.
• ​Under-plate provides protection from punctures.
• ​Mesh lining is antimicrobial.
• Anti-Fatigue™ technology absorbs shock and restores energy to key foot zones.

What the Timberland PRO Men’s 52562 Endurance 6” Work Boot Is Best For

These boots are excellent for concrete because of their shock-absorption technology, but also are quite a good choice for oil fields because of their slip-resistance (which buyers remark is first class). Because these boots include a plate underneath to shield your feet from punctures, and also include protection from live wires, I would recommend them for particularly hazardous workplaces.

Pros and Cons

These boots are sturdy and will provide your feet with excellent protection, and they also have fantastic traction. They are however reportedly very heavy, which may result in fatigue if you have to do more walking and climbing than standing.

Sizing Tips: Some buyers say these shoes run a tad large. Wide sizes are available.

Best Steel Toe Boots for Plantar Fasciitis

Plantar fasciitis is a common repetitive strain injury which causes chronic inflammation in the ligament of your sole. The following work boots are recommended to help take strain off the ligament and alleviate pain.

 1.  Timberland PRO Men's Pitboss 6" Steel-Toe Boot

Rating: 4.3 / 5.0

​

These steel toe boots from Timberland are extremely popular, with more than 2,680 customer reviews as of the time of this writing and an average rating of 4/5 stars. You can buy them for $60-$150.

Key Features

• Leather with a synthetic sole. Shaft measures 5.5” and heel measures 1.5”.
• ​Antimicrobial cover for open-cell polyurethane footbed.
• ​Steel toe meets ANSI standards and provides extra room for a comfortable fit.
• ​Rubber outsole is resistant to oil, slips and abrasions as well as electrical hazards.
• Includes a removable sock liner to prevent blisters.

What the Timberland PRO Men's Pitboss 6" Steel-Toe Boot Is Best For

These boots are great for reducing foot strain and increasing comfort. Buyers also mention that they are incredibly durable, and that they don’t dry out in environments where that is typically a problem (i.e. trash burning plants).

Pros and Cons

According to customers, these are incredibly comfortable shoes which provide great support. One buyer even stated that they feel like memory foam. They break in quickly and last a lot longer than many other boots even in a higher price range, making them a fantastic value. There are not a lot of consistent complaints, but do note that these boots are not waterproof.

Sizing Tips: Buyers say that these boots fit true to size.

 2.  Timberland PRO Men’s Rigmaster Steel-Toe Waterproof Work Boot

Rating: 4.3 / 5.0

​

This highly-rated work boot has more than 250 customer reviews and an average of 4.5 out of 5 stars. You can buy it in the $150-$200 range.

Key Features

• Leather with rubber sole. Shaft measures 7.75” and heel measures 1.5”.
• ​Leather upper is waterproof.
• ​Includes anti-fatigue technology with conical midsole geometry.
• Footbed is contoured single-density open cell polyurethane.
• ​Quick-release and easy pull-on.
• ​Meet ANSI and ATSM standards for toe safety as well as for protection from live wires.
• Lug sole is oil- and slip-resistant with a triangular lug pattern for optimum stability.

What the Timberland PRO Men’s Rigmaster Steel-Toe Waterproof Work Boot Is Best For

These boots look to be a fabulous choice for all-around wear. The strong traction helps to keep your feet grounded and stable, while the comfortable footbed and midsole provide support for your ligaments.

Pros and Cons

As these are waterproof, you could wear them in a variety of environments. Electrical safety is another big plus. While a few customers said that these boots did not last that long, most say they held up great and that they can provide you with years of excellent support.

Sizing Tips: These boots tend to run narrow, even the “wide” sizes. So if you have wide feet, these may not be the best choice.

Most Comfortable Steel Toe Boots for Standing All Day

 1.  Rockport Work Men's RK6761 Work Shoe

Rating: 4.3 / 5.0

​

These work boots have more than 20 reviews and an average rating of 4.5 stars. You can buy them for $60-$200.

Key Features

• Leather construction with rubber sole.
• ​Resistant to oil and slips.
• Features Dual Resistor and Electro-Static Dissipative technology for extra comfort.

What the Rockport Work Men's RK6761 Work Shoe Is Best For

These shoes are somewhat minimal in their design compared to a lot of the others featured here. In fact, they are actual shoes as opposed to boots. As a result, they do not provide the ankle support you need for a lot of activity, but they are great for standing in place all day. They are also a wonderful choice for overall comfort.

Pros and Cons

Customers say that these are incredibly comfortable shoes which stand up great to daily wear. As far as drawbacks, they are reportedly squeaky, but this is not an issue if you are standing in place most of the time.

Sizing Tips: These shoes run wide, which is perfect if you have wide feet.

 2.  Wolverine Men's Buccaneer W04822 Waterproof Boot

Rating: 4.3 / 5.0

​

This waterproof steel toe boot has more than 30 customer reviews with an average rating of 4.5 out of 5 stars. You can buy it for $100-$200.

Key Features

• Leather with a synthetic sole.
• ​Waterproof with mesh linings which help to keep moisture out of the boot.
• ​Wolverine multishox contour welt with a nylon shank.
• ​Multishock shock absorbing compression pads are molded directly into the outsole.
• Slip-resistant rubber lug and electrical hazard protection.

What the Wolverine Men's Buccaneer W04822 Waterproof Boot Is Best For

In the product description, the manufacturer mentions this boot combines the “flexibility and comfort of an athletic shoe with the support and durability of a work boot.” Actually, that would make it the perfect choice for standing in place all day or walking.

Pros and Cons

These boots are waterproof and apparently do an amazing job also repelling dirt, oil, mud and grease. For that reason, they are an excellent choice if you work in a particularly dirty environment, or if you spend time both indoors and outdoors and do not want to track anything in.

Sizing Tips: These boots run slightly small, so you may want to order half a size larger than you normally would.

Best Steel Toe Boots for Comfort

 1.  KEEN Utility Men’s Atlanta Cool Steel Toe Work Shoe

Rating: 4.3 / 5.0

​

Technically, this is a shoe, not a boot, but if you are standing a lot and do not need as much support, more minimal footwear may be more comfortable to wear. Plus, this is a very popular product with more than 910 customer reviews and 4.5 out of 5 stars. You can buy these shoes for $60-$200.

Key Features

• Leather and mesh with a rubber sole and a heel measuring 1.25”.
• ​Asymmetrical steel toes for left and right provide additional comfort for your feet.
• ​Rubber outsole is oil- and slip-resistant.
• Waterproof with a breathable membrane.

What the KEEN Utility Men’s Atlanta Cool Steel Toe Work Shoe Is Best For

These are great whether you do a lot of standing or you are more active (though for many professions, I would still recommend proper boots). Stick with these if you find boots uncomfortable to wear and want something less restricting.

Pros and Cons

Many buyers say that these are some of the most comfortable work shoes they have ever worn, and that they are perfect for a variety of environments—everything from concrete to grass.

Sizing Tips: These shoes apparently provide fantastic support for high arches. They do run large, so purchase half a size smaller.

 2.  Dr. Martens Ashridge Steel Toe Oxford

Rating: 4.3 / 5.0

​

This is also a boot, not a shoe, but with more than 100 reviews and an average rating of 4 out of 5 stars, it is worth considering if you want comfortable steel toe footwear for work. You can buy it for $80-$150.

Key Features

• Leather with a rubber AirWair outsole which alleviates shock and resists oil, chemical corrosion and slips.
• ​Stitch welt construction provides extra flexibility.
• ​Wooden shank adds stability.
• ​Includes a removable Smartmask insole.
• Water-resistant with moisture-wicking lining.

What the Dr. Martens Ashridge Steel Toe Oxford Is Best For

As with the KEEN shoe, I would recommend this only if you do not need the extra ankle support that you get with a full-size boot. But if you prefer the extra freedom of movement and comfort, this could be an excellent option.

Pros and Cons

Customers love how comfortable these shoes are. One buyer even mentioned that he purchases new safety shoes ever year, and most years comes right back to these. They are comfortable all day long and they provide a solid grip on greasy and oily concrete floors. Ankle support is not the best, but that is to be expected without a full-size boot.

Sizing Tips: These shoes reportedly fit true to size, but they do run narrow and may not be an ideal option for wide feet.

 3.  Wolverine Men's Raider Romeo Contour Welt Steel Toe Work Boot

Rating: 4.3 / 5.0

​

This steel toe work boot has more than 60 customer reviews and an average rating of 4 out of 5 stars. You can purchase it for $100-$150.

Key Features

• Leather with a rubber sole.
• ​Contour welt design provides the “comfort of athletic shoes,” allowing the boots to bend at key points for added flexibility.
• ​Includes an advanced comfort polyurethane midsole.
• MultiShox comfort system absorbs shock.

What the Wolverine Men's Raider Romeo Contour Welt Steel Toe Work Boot Is Best For

If you want some of the flexibility of work shoes with the ankle support of full-size work boots, perhaps the best compromise is a design like this one. These boots include stretchable gore panels for comfort and flexibility, but do not compromise on support.

Pros and Cons

According to customers, the ankle on this boot provides enough firmness for stability, but is not too tight for comfort and motion. Some buyers also mentioned that the insole quality is excellent. The few complaints for these boots mostly seemed to come from customers who were not familiar with steel toe construction.

Sizing Tips: Most buyers say that these boots fit true to size.

Other Suggestions